1. After the pump works 2minutes, the controller will automatically self -test about 30 seconds, and then the pump will restart, this is normal situation.
2. Note: If you want the battery fully charged, please choose the battery mode"ll"and let the pump stop running at the same time.
(There are 2 conditions that the pump will stop as following: 1> The tank was full. 2>Disconnect COM1 & WH terminal.)
Operating Conditions |
|
Max system voltage |
1000Vdc |
Limiting reverse current |
15A |
Operating temperature range |
~40°C To 85°C |
Max. static load front (e.g, snow) |
5400Pa |
Max. static load back(e.g, wind) |
2400Pa |
Module type |
ED235M/MB/MA-48 |
||||||||
Power output |
Pmax |
Wp |
220 |
225 |
230 |
235 |
240 |
245 |
250 |
Power output tolerances |
△Pmax |
W |
0~+5 |
||||||
Voltage at Pmax |
Vmpp |
V |
25.38 |
25.72 |
26.02 |
26.26 |
26.50 |
26.75 |
26.97 |
Current at Pmax |
Impp |
A |
8.67 |
8.75 |
8.84 |
8.95 |
9.06 |
9.16 |
9.27 |
Open-circuit voltage |
Voc |
V |
30.71 |
31.12 |
31.49 |
31.78 |
32.07 |
32.26 |
32.45 |
Short-circuit current |
Isc |
A |
9.32 |
9.38 |
9.47 |
9.58 |
9.69 |
9.80 |
9.91 |
Module Efficiency |
Eff. |
% |
16.75 |
17.13 |
17.51 |
17.89 |
18.27 |
18.65 |
19.03 |
© 2018 EDWIN INDUSTRIAL CO., LIMITED. All Rights Reserved. Company