1. After the pump works 2minutes, the controller will automatically self -test about 30 seconds, and then the pump will restart, this is normal situation.
2. Note: If you want the battery fully charged, please choose the battery mode"ll"and let the pump stop running at the same time.
(There are 2 conditions that the pump will stop as following: 1> The tank was full. 2>Disconnect COM1 & WH terminal.)
Model | ED05M-36 | ED10M-36 | ED20M-36 | ED30M-36 | ED40M-36 | ED50M-36 |
Pm | 5 | 10 | 20 | 30 | 40 | 50 |
Vmp | 17.9V | 17.9V | 17.88V | 17.9V | 18.1V | 18.32V |
Imp | 0.28A | 0.56A | 1.12A | 1.68A | 2.21 A | 2.73A |
Voc | 22.3V | 22.2V | 22.2V | 22.37V | 22.62V | 22.8V |
Isc | 0.32A | 0.62A | 1.24A | 1.82A | 2.48A | 2.93A |
Maximum System Voltage | 1000VDC | 1000VDC | 1000VDC | 1000VDC | 1000VDC | 1000VDC |
Cells Size | 39 × 22.5mm | 78 ×22.5mm | 78×45mm | 78 × 66mm | 156×45mm | 156 ×52mm |
Modules Size | 275 × 206 ×25mm | 275×361 × 25mm | 478×361 ×25mm | 667×361 ×25mm | 478 × 676 ×25mm | 541 × 676 ×35mm |
No. of cells | 36(4×9) | 36(4×9) | 36(4×9) | 36(4×9) | 36(4×9) | 36(4×9) |
Weight | 0.7 | 1.2 | 2 | 2.8 | 3.6 | 4.6 |
No. of Mounting Holes | 4 | 4 | 4 | 4 | 4 | 4 |
No. of Waterspout | - | - | - | - | - | 16 |
MODEL | RATED VOLTAGE | MAX OPEN CIRCUIT VOLTAGE | BATTERY | MAX LOADED CURRENT(A) |
A | 17.5V | 30V | 12V | 12 |
B | 24V | 50V | 24V | 12 |
C | 36V | 80V | 36V | 12 |
D | 48V | 100V | 48V | 12 |
