1. After the pump works 2minutes, the controller will automatically self -test about 30 seconds, and then the pump will restart, this is normal situation.
2. Note: If you want the battery fully charged, please choose the battery mode"ll"and let the pump stop running at the same time.
(There are 2 conditions that the pump will stop as following: 1> The tank was full. 2>Disconnect COM1 & WH terminal.)
Model | ED120M-36 | ED125M-36 | ED130M-36 | ED135M-36 | ED140M-36 | ED145M-36 |
Pm | 120 | 125 | 130 | 135 | 140 | 145 |
Vmp | 18.58V | 18.31V | 18.71V | 18.6V | 18.8V | 18.04V |
Imp | 6.46A | 6.83A | 6.95A | 7.26A | 7.45A | 8.04A |
Voc | 22.86V | 22.8V | 22.92V | 22.86V | 22.99V | 22.67V |
Isc | 6.92A | 7.32A | 7.44A | 7.76A | 7.87A | 8.67A |
Maximum System Voltage | 1000VDC | 1000VDC | 1000VDC | 1000VDC | 1000VDC | 1000VDC |
Cells Size | 156×122mm | 156×130mm | 156×130mm | 156×137mm | 156×137mm | 156×156mm |
Modules Size | 1171×676 x35mm | 1243×676×35mm | 1243×676×35mm | 1306×676×35mm | 1306×676×35mm | 1482×676×35mm |
No. of cells | 36 (4×9) | 36(4×9) | 36(4×9) | 36 (4×9) | 36(4×9) | 36(4×9) |
Weight | 9 | 9.6 | 9.6 | 10.1 | 10.1 | 11.5 |
No. of Mounting Holes | 8 | 8 | 8 | 8 | 8 | 8 |
No. of Waterspout | 16 | 16 | 16 | 16 | 16 | 16 |
MODEL | RATED VOLTAGE | MAX OPEN CIRCUIT VOLTAGE | BATTERY | MAX LOADED CURRENT(A) |
A | 17.5V | 30V | 12V | 12 |
B | 24V | 50V | 24V | 12 |
C | 36V | 80V | 36V | 12 |
D | 48V | 100V | 48V | 12 |
