1. After the pump works 2minutes, the controller will automatically self -test about 30 seconds, and then the pump will restart, this is normal situation.
2. Note: If you want the battery fully charged, please choose the battery mode"ll"and let the pump stop running at the same time.
(There are 2 conditions that the pump will stop as following: 1> The tank was full. 2>Disconnect COM1 & WH terminal.)
Model |
ED150M-36 |
ED160M-36 |
ED170M-36 |
Pm |
150 |
160 |
170 |
Vmp |
18.3V |
19.01V |
19.04V |
Imp |
8.2A |
8.42A |
8.93A |
Voc |
22.8V |
23.01V |
23.61V |
Isc |
8.78A |
8.97A |
9.31A |
Maximum System Voltage |
1000VDC |
1000VDC |
1000VDC |
Cells Size |
156×156mm |
156×156mm |
156×156mm |
Modules Size |
1482×676×35mm |
1482 × 676 × 35mm |
1482 × 676 × 35mm |
No. of cells |
36(4×9) |
36(4×9) |
36(4×9) |
Weight |
11.5 |
11.5 |
11.5 |
No. of Mounting Holes |
8 |
8 |
8 |
No. of Waterspout |
16 |
16 |
16 |
MODEL |
RATED VOLTAGE |
MAX OPEN CIRCUIT VOLTAGE |
BATTERY |
MAX LOADED CURRENT(A) |
A |
17.5V |
30V |
12V |
12 |
B |
24V |
50V |
24V |
12 |
C |
36V |
80V |
36V |
12 |
D |
48V |
100V |
48V |
12 |
© 2018 EDWIN INDUSTRIAL CO., LIMITED. All Rights Reserved. Company