1. After the pump works 2minutes, the controller will automatically self -test about 30 seconds, and then the pump will restart, this is normal situation.
2. Note: If you want the battery fully charged, please choose the battery mode"ll"and let the pump stop running at the same time.
(There are 2 conditions that the pump will stop as following: 1> The tank was full. 2>Disconnect COM1 & WH terminal.)
Model | ED90M-36 | ED95M-36 | ED100M-36 | ED105M-36 | ED110M-36 | ED115M-36 |
Pm | 90 | 95 | 100 | 105 | 110 | 115 |
Vmp | 18.2V | 18,71V | 18.29V | 1875V | 18,55V | 18.14V |
Imp | 4.95A | 5.08A | 5.47A | 5.6A | 5.93A | 6.34A |
Voc | 22.72V | 22.92V | 22.8V | 22.9V | 22.92V | 22.65V |
Isc | 5.3A | 5.44A | 5.85A | 6.1A | 6.34A | 6.8A |
Maximum System Voltage | 1000VDC | 1000VDC | 1000VDC | 1000VDC | 1000VDC | 1000VDC |
Cells Size | 156×95mm | 156×95mm | 156×104mm | 156×104mm | 156×111mm | 156×122mm |
Modules Size | 928×676×35mm | 928×676×35mm | 1009×676×35mm | 1009×676×35mm | 1072×676×35mm | 1171×676×35mm |
No. of cells | 36(4×9) | 36(4×9) | 36(4×9) | 36(4×9) | 36(4×9) | 36(4×9) |
Weight | 12 | 7.2 | 7.8 | 7.8 | 8.3 | 9 |
No. of Mounting Holes | 4 | 4 | 4 | 4 | 4 | 8 |
No. of Waterspout | 16 | 16 | 16 | 16 | 16 | 16 |
MODEL | RATED VOLTAGE | MAX OPEN CIRCUIT VOLTAGE | BATTERY | MAX LOADED CURRENT(A) |
A | 17.5V | 30V | 12V | 12 |
B | 24V | 50V | 24V | 12 |
C | 36V | 80V | 36V | 12 |
D | 48V | 100V | 48V | 12 |
