edwina@edwin-pump.com
JSP Series High Flow Rate and High-lift Self-priming JET Pump
View All Products
en
This self-priming pump features an HT200 cast iron body, brass impeller, carbon/ceramic mechanical seal and AISI 304 shaft; paired with a copper-winding motor with C&U bearings, IP44 protection and Class F insulation, it delivers stable, durable performance for clean water transfer in household and small equipment applications.
Application :
Ideal for transferring clean water or other liquids similar to water in physical and chemical properties.
Recommended for domestic and civil applications such as distributing water in consumption with small pressure sets, irrigating gardens and allotments, and drawing water from tanks. It can handle situations where air or water may be present in the water to be pumped.
Widely used in living water supply, water tower water supply, automatic irrigation systems, well water lifting, and various corollary equipments.
Pump details :
Cast Iron Body and Support: Special anti-rust treatment for durability.
Brass Impeller and Rust-free Copper Inserts: Ensuring smooth restart after long periods of inactivity.
AISI 304 Stainless Steel Shaft: Guaranteeing rust-free water contact areas.
Maximum Liquid Temperature: +60℃, suitable for hot water applications.
Maximum Suction Height: +8m, capable of handling high vertical lifts.
Self-priming: Ensuring quick and easy startup without manual priming.
Motor Specifications :
Durable Copper Wiring: For longer lifespan and enhanced performance.
High-Efficiency C&U Bearings: Ensuring smooth operation.
Built-in Thermal Protector: With overheating protection for single-phase motor.
Insulation Rating: Class F, for reliable electrical insulation.
Protection Rating: IP44, ensuring safety against water ingress.
Maximum Ambient Temperature: +40℃, suitable for various environments.

|
Materials Table |
||
|
NO. |
Part |
Material |
|
1 |
Pump Body |
HT200 |
|
2 |
Nozzle |
PPO |
|
3 |
Venturi |
PPO |
|
4 |
Diffuser |
PPO |
|
5 |
Impeller |
Brass |
|
6 |
Mechanical Seal |
Carbon/Ceramic |
|
7 |
Support |
HT200 |
|
8 |
Shaft And Rotor |
|
|
9 |
Stator |
|
|
10 |
Motor Case |
Aluminum |
|
11 |
Motor Cover |
Cast iron |
|
12 |
Fan | PP |
|
13 |
Fan Cover | |
|
14 |
Capacitor Holding Box |
|
|
15 |
Capacitor |
|
|
16 |
Terminal Cover |
|
| Model | Power | Inlet/Outlet | Max. Flow | Max. Head | Max. Suction | |
| kW | HP | (L/min) | (m) | (m) | ||
| JSP-60 | 0.45 | 0.6 | 1"x1" | 40 | 40 | 8 |
| JSP-80 | 0.6 | 0.8 | 1"x1" | 45 | 45 | 8 |
| JSP-100 | 0.75 | 1 | 1"x1" | 50 | 50 | 8 |
| JSP-150 | 1.1 | 1.5 | 1.25"x1" | 80 | 55 | 8 |
| JSP-200 | 1.5 | 2 | 1.25"x1" | 85 | 65 | 8 |
Submersible pump applications vary considerably across water circulation, tank transfer, drainage, aquaculture, and indu...
READ MORESolar-powered water pumping projects often involve challenging operating conditions, including deep wells, elevated stor...
READ MOREA residential water supply system needs to provide sufficient water pressure while maintaining a stable flow across diff...
READ MORE
Water Shortage Protection Pressure range : 20-100psi Rated Current : 12A Rated ...
See Details
Zinc Alloy Bottom Antifatiguefor water pumpsPressure range : 15-100psiPressure s...
See Details
Stainless steel Working temperature: -20°C~99°C (Butyl) -20°C~99°C (EPDM) 0°C~77...
See Details
High Pressure Hot And Cold Water Circulation Pump Inlet/Outlet: 11/2" x 11/2" Bo...
See Details
Rated input voltage : AC380V, Three phase 50Hz/ 60Hz Rated output power : 18.5-9...
See Details
Manually operationcontrol box of single-phaseFor motor power no more than 37kW(5...
See Details










