HRS20/12Z Series 1 Inch Copper Winding Water Booster Pump
View All Products
en
Power: 275W
Max. Head: 12M
Max. Flow: 3.1m³/h
Inlet x Outlet: 1" x 1"
Body length: 200mm
Applications :
Low noise automatic booster pump, suitable for cold and hot water pressurization in small and medium-sized apartment, such as: water supply low pressure in roof tank, low pressure of solar water outlet, gas water heater won’t turn on, low tap water pressure etc.
Operating Conditions :
Ambient Temperature: 0℃~40℃
Ambient Humidity: 95%
Liquid Temperature: -10℃~95℃
Ambient temperature must be lower than liquid temperature, in order to avoid condensate water produced in the interior of stator
Liquid: Clean, non-corrosive and non-explosive liquids, without any particle, fiber or mineral oil.
Water/Glycol mixtures max. mixing ratio should be 1:1
Motor and Pump :
Copper winding
Built-in thermal protector
Ceramic shaft
Ceramic bearing
PP impeller
Male tab connection to the cable
Options on request :
Different cable length and plug
Brass flow meter can be optional
Different voltage and frequency
Performance Curves :

Technical Data :
| Model | Power | Max.Flow | Max.Head | Voltage | Material of pump body | Dimension(mm) | Weight | |||||||
| (W) | (m³/h) | (m) | 220V/ 50Hz | 220V/ 60Hz | 127V/ 60Hz | Cast Iron | Brass | Stainless steel | L | B | H | G | (Kg) | |
| HRS20/12Z | 275 | 3.1 | 12 | ★ | ★ | ★ | ★ | ★ | ★ | 200 | 130 | 156 | 1" | 4.5 |
| HRS20/12ZS | 4.3 | |||||||||||||
Installation Dimension :

Access to groundwater has become an important part of water supply planning in both rural and industrial environments. A...
READ MOREA longest lasting deep well pump is not something people usually think about when everything is working normally. It sit...
READ MOREOil Filled Borehole Pump are designed for deep water extraction where stable performance and long operating cycles are r...
READ MORE
Water Shortage Protection Pressure range : 20-100psi Rated Current : 12A Rated ...
See Details
Starting pressure : 1.2bar - 3.0barMax. Rated Current : 10AMax. Allowable Press...
See Details
Fixed diaphram membrane, carbon steel tank Pre-charge pressure of 1.5bar Max. wo...
See Details
Stainless steel Working temperature: -20°C~99°C (Butyl) -20°C~99°C (EPDM) 0°C~77...
See Details
Hot And Cold Water Circulation Pump Inlet / Outlet: 1" x 1" Body length: 130mm ...
See Details
High Pressure Hot And Cold Water Circulation Pump Inlet/Outlet: 11/2" x 11/2" Bo...
See Details











