HRS20/12Z Series 1 Inch Copper Winding Water Booster Pump
View All Products
en
Power: 275W
Max. Head: 12M
Max. Flow: 3.1M
Inlet x Outlet: 1" x 1"
Body length: 200mm
Applications :
Low noise automatic booster pump, suitable for cold and hot water pressurization in small and medium-sized apartment, such as: water supply low pressure in roof tank, low pressure of solar water outlet, gas water heater won’t turn on, low tap water pressure etc.
Operating Conditions :
Ambient Temperature: 0℃~40℃
Ambient Humidity: 95%
Liquid Temperature: -10℃~110℃
Ambient temperature must be lower than liquid temperature, in order to avoid condensate water produced in the interior of stator
Liquid: Clean, non-corrosive and non-explosive liquids, without any particle, fiber or mineral oil.
Water/Glycol mixtures max. mixing ratio should be 1:1
Options on request :
Different cable length and plug
Brass flow meter can be optional
Different voltage and frequency
Warranty :
1 year (According to our general sales conditions)
Motor and Pump :
Copper winding
Built-in thermal protector
Ceramic shaft
Ceramic bearing
PP impeller
Male tab connection to the cable
Supply brass connector (1" to 3/4") for each unit
Performance Curves :

Technical Data :

Installation Dimension :

As off-grid living, homestead farming, and eco-friendly projects grow in popularity, water supply systems powered by re...
READ MOREAs modern buildings evolve, the systems hidden behind the walls also need to keep up. Among them, the Intelligent Circu...
READ MOREA Solar Pump With Stainless Steel Pump is becoming a familiar sight in farms, gardens, and remote construction sites. I...
READ MORE
Water Shortage Protection Pressure range : 20-100psi Rated Current : 12A Rated ...
See Details
Pressure Switch for Water Pump Pressure range : 0.5-3.5 BAR Rated Current : 4A ;...
See Details
Starting pressure : 1.2bar - 3.0barMax. Rated Current : 10AMax. Allowable Press...
See Details
Starting pressure : 1.2bar - 3.0bar Max. Rated Current : 10A Max. Allowable Pres...
See Details
Starting pressure : 1.2bar - 3.0bar Max. Rated Current : 10A Max. Working Pressu...
See Details
Carbon steel flange Working temperature: -10°C~99°C (Butyl) -10°C~99°C (EPDM) 0°...
See Details




