HRS15/4-130 HRS15/6-130 Hot And Cold Water Circulation Pump for Home Use
View All Products
en
Hot And Cold Water Circulation Pump
Inlet / Outlet: 1" x 1"
Body length: 130mm
for Home Use
Description :
1) Apply to heating system
2) System pressure: 10 bar
3) Operating Condition:
Ambient Temperature: 0℃~40℃
Ambient Humidity: 95%
Liquid Temperature: -10℃~110℃
Ambient temperature must be lower than liquid temperature, in order to avoid condensate water produced in the interior of stator
4) Liquid: Clean, non-corrosive and non-explosive liquids, without any particle, fiber or mineral oil.
5) Water/Glycol mixtures max. mixing ratio should be 1:1
6) Dry running no more than 10s
7) Options on request
Different cable length and plug
Brass flow meter can be optional
Different voltage and frequency
8) Warranty: 1 year (According to our general sales conditions)
Motor and Pump
Copper winding
Built-in thermal protector
Ceramic shaft
Ceramic bearing
PP impeller
Male tab connection to the cable
Supply brass connector for each unit
Options on request: Brass or Stainless steel pump body
Performance Curve :

Technical Data :

Installation Dimension :

As off-grid living, homestead farming, and eco-friendly projects grow in popularity, water supply systems powered by re...
READ MOREAs modern buildings evolve, the systems hidden behind the walls also need to keep up. Among them, the Intelligent Circu...
READ MOREA Solar Pump With Stainless Steel Pump is becoming a familiar sight in farms, gardens, and remote construction sites. I...
READ MORE
Voltage Stabilization Temperature-resistant Rated Current : 12ARated Voltage : 1...
See Details
Starting pressure : 1.2bar - 3.0barMax. Rated Current : 10AMax. Allowable Press...
See Details
Starting pressure : 1.2bar - 3.0bar Max. Rated Current : 10A Max. Allowable Pres...
See Details
Fixed diaphram membrane, carbon steel tank Pre-charge pressure of 1.5bar Max. wo...
See Details
Max. pressure :6bar-16bar Working temperature: -20°C~99°C (Butyl) -20°C~99°C (EP...
See Details
Energy Efficiency Hot And Cold Water Circulation Pump Inlet / Outlet : 2" x 2" ...
See Details




